2-Pin LED Flasher Relay w/Adjustable Flash Speed Interval
Fix LED Turn Signal Light Hyper Blink Flash
For Motorcycle

Overview:

    LF2-ADJ features LED adjustable flash speed, a piece of 2-pin Electronic LED 12V Flasher Relay Fix for Turn Signal and Blinker Light. This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard. Better all, dial to the desired flash speed whenever you need to. These are designed for most 2-pin configurations. Simple Plug N' Play.

Features:

• Solution for fast turn signal blinking after installing LED bulbs
• Completely waterproof design
• Directly replace the OEM two-pin flasher
• Eliminate the need for tapping wires to install the load resistors
• Allow LED bulbs to blink at the normal or desired rate
• Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well

Important Information about the LED Flasher:

    The LED flasher does not replace all flasher relay. Before ordering, please make sure the 2-pin configuration is the same as your vehicle's. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty.

Connection and adjustment Instructions:

Flash speed adjustment:

    Replace the stock relay in the fuse box. Please check your owner manual to locate the flasher. Pin B is power in, and Pin L is the adjustable power out.